Frequently-asked questions & Driver laptop Acer Aspire 1200
By : lhagus813@gmail.com
Pada kesempatan kali ini saya post tentang Frequently-asked questions & Driver laptop Acer Aspire 1200 yang mana banyak rekan – rekan kita yang selalu mencari solusi melalui mesin telusur mbah www.google.com yang selalu setia menemani kita dalam hal bagaimana memberikan solusi ketika terjadi gangguan atau error pada perangkat unit notebook seri acer aspire 1200 series. Dari unit notebook ini memlang di luncurkan oleh vendor www.acer.com yang kemudian menjadi awal regenerasi dari perkembangan teknologi sampai saat ini kita bisa menikmati produk dari www.acer.com sendiri.
Berikut F.AQ yang saya dapat bocoran dari situs resmi www.support.acer.com , usr guide acer aspire 1200 series.
Frequently-asked questions notebook acer aspire 1200 series
This is a list of possible situations that may arise during the use of your computer, and it gives easy answers and solutions to these questions.
I press the power switch, but the computer does not start or boot-up.
Look at the Power status indicator:
Ø If it is not lit, no power is being applied to the computer. Check the following:
Ø If you are running on battery power, it may be low and unable to power the computer. Connect the AC adapter to recharge the battery pack.
Ø Make sure the AC adapter is plugged in properly to the computer and to the power outlet.
Ø if it is lit, check if a non-bootable (non-system) diskette is in the floppy drive.
Remove or replace it with a system diskette and press Ctrl-Alt-Del to restart the system. The operating system files may be damaged or missing. Insert the startup disk you created during Windows setup into the floppy drive and press Ctrl-Alt-Del to restart the system. This will diagnose your system and make necessary fixes.
Nothing appears on the screen.
The computer’s power management system automatically blanks the screen to save power. Press any key to turn the display back on.
If pressing a key does not turn the display back on, two things might be the cause:
Ø The brightness level might be too low. Press Fn-↑and Fn-↓to adjust the brightness level.
Ø The display device might be set to an external monitor. Press the display toggle hot key Fn-F5 to toggle the display back to the computer.
Image is not full-screen.
Make sure the resolution is set to a resolution your system supports natively. Rightclick on your Windows desktop and select Properties to bring up the Display Properties dialog box. Then click on the Settings tab to make sure the resolution is set to the appropriate resolution. Resolutions lower than the specified resolution are not full-screen on the computer or on an external monitor.
No audio from the computer.
Check the following:
Ø The volume may be muted. In Windows, look at the volume control icon on the taskbar. If it is crossed-out, click on the icon and deselect the Mute option.
Ø The volume level may be too low. In Windows, look at the volume control icon
on the taskbar. Click on the icon and adjust the level. You can also use the volume control knob on the front panel of the computer to adjust the volume. If headphones, earphones or external speakers are connected to the speaker / headphone-out port on the computer, the internal speakers automatically turn off.
External microphone does not work.
Check the following:
Ø Make sure the external microphone is connected to the microphone-in jack on the computer.
Ø If you cannot hear playback, the speakers may be muted.
How do I eject the optical drive tray with the computer turned off?
There is a emergency eject hole on the optical drive. Simply insert the tip of a pen or paperclip and push to eject the optical drive tray. For the location of the emergency eject hole, see “Left view” on page 5.
The keyboard does not respond.
Try attaching an external PS/2 or USB keyboard to the appropriate port on the computer. If it works, contact your dealer or an authorized service center as the internal keyboard cable may be loose.
The floppy drive cannot access a diskette.
Check the following:
Ø Make sure the diskette is properly inserted in the floppy drive.
Ø Make sure the diskette is formatted.
Ø If the diskette is not the cause of the problem, the floppy drive may be dirty.
Ø Clean it using a drive cleaning kit. Follow the instructions included with the kit.
The CD or DVD drive cannot access a disc.
Check the following:
Make sure the disc is supported by the drive. If your computer has a CD-ROM drive, it can read CDs but cannot read DVDs. If your computer has a DVD drive, it can read DVDs in addition to CDs.
Ø When placing the CD or DVD in the drive tray, make sure it is secure in the spindle on the drive tray.
Ø Make sure the CD or DVD is free from scratches or smudges. If the CD or DVD is dirty, clean it using a disc cleaning kit. Remember to follow the instructions included with the kit.
Ø If the problem does not lie with the disc, your CD or DVD drive may be dirty. Clean it using a drive cleaning kit. Follow the instructions included with the kit.
The printer does not work.
Check the following:
Ø Make sure that the printer is connected to a power outlet and it is turned on.
Ø Depending on your printer connection (USB or parallel), make sure the printer cable is connected securely to the appropriate ports on both the computer and the printer.
Ø If you use a parallel port, access the BIOS Setup Utility by pressing F2 after
Ø restarting your system. Go to the Others screen and verify that the parallel port is enabled. See “Others” on page 69.
I want to set up my location to use the internal modem.
Follow these steps:
1 Click on Start, then click Control Panel.
2 Double-click on Phone and Modem Options.
3 In the Dialing Rules tab, begin setting up your location.
Refer to the Windows Help and Support and the modem manual.
Why can’t I charge my battery to 100% charged when it is 99-95% charged?
To preserve the life of the battery, the system only lets you charge the battery when its capacity falls below 95%. However, it is recommended that you bring an extra battery and let the battery in the system use up its power before charging it.
Error messages
If you receive an error message, note the message and take the corrective action. The following table lists the error messages in alphabetical order together with the recommended course of action.
Note: To enter the BIOS Setup Utility, press F2 during POST. For more
information, see “BIOS Setup Utility” on page 62.
Error Messages code
0200 Failure Fixed Disk
Corrective Action
=====================================================
Error Messages code
Hard disk error detected.
Corrective Action
Enter the BIOS Setup Utility and verify the hard disk is
detected. If not, contact your dealer or an authorized
service center.
=====================================================
Error Messages code
0211 Keyboard error
Corrective Action
Try using an external keyboard.
If the external keyboard works, contact your dealer or
an authorized service center.
=====================================================
Error Messages code
0212 Keyboard Controller Failed
Corrective Action
Keyboard controller test failed.
Write down the message and contact your dealer or an
authorized service center.
=====================================================
Error Messages code
0220 Monitor type does not match CMOS - Run SETUP
Corrective Action
Display device mismatch.
Enter the BIOS Setup Utility and verify the parameters
(try loading the default settings); then save and restart
your computer.
=====================================================
Error Messages code
0230 Shadow Ram Failed at offset: Nnnn
Corrective Action
Shadow RAM test failed.
Write down the message and contact your dealer or an authorized service center.
=====================================================
Error Messages code
0231 System RAM Failed at offset: Nnnn
Corrective Action
System RAM test failed.
Write down the message and contact your dealer or an
authorized service center.
=====================================================
Error Messages code
0232 Extended RAM Failed at offset: nnnn
Corrective Action
Extended RAM test failed.
Write down the message and contact your dealer or an
authorized service center.
=====================================================
Error Messages code
0250 System battery is dead -
Corrective Action
Replace and run SETUP
CMOS clock battery needs to be replaced.
Contact your dealer or an authorized service center.
=====================================================
Error Messages code
0251 System CMOS checksum bad - Default configuration used
Corrective Action
CMOS has been corrupted or modified incorrectly.
Enter the BIOS Setup Utility and verify the parameters;
then save and restart your computer.
If the problem persists, contact your dealer or an
authorized service center.
=====================================================
Error Messages code
0260 System timer error
Corrective Action
System timer test failed, and the system board needs to be repaired.
Write down the message and contact your dealer or an
authorized service center.
=====================================================
Error Messages code
0270 Real time clock error
Corrective Action
Real time clock test failed, and the system board may need to be repaired.
Write down the message and contact your dealer or an
authorized service center.
=====================================================
Error Messages code
0271 Check date and time settings
Corrective Action
Date and time are out of range, and was reset.
Enter the BIOS Setup Utility and set the correct date and time.
=====================================================
Error Messages code
0280 Previous boot incomplete -
Corrective Action
Default configuration used Previous boot-up was not completed successfully.
Enter the BIOS Setup Utility and verify the parameters
(try loading the default settings); then save and restart
your computer.
=====================================================
Error Messages code
0281 Memory Size found by POST differed from CMOS
Corrective Action
Try reinstalling the memory. See “Installing memory”
on page 47.
If the problem persists, contact your dealer or an authorized service center.
=====================================================
Error Messages code
02B0 Diskette drive A error
02B2 Incorrect Drive A type – run SETUP
Corrective Action
Floppy drive test failed, and may need to be repaired or replaced.
Contact your dealer or an authorized service center.
=====================================================
Error Messages code
02D0 System cache error – Cache Disabled
Corrective Action
Cache memory test failed and was disabled; cache
needs to be replaced.
Contact your dealer or an authorized service center.
=====================================================
Error Messages code
02F4 EISA CMOS not writeable
Corrective Action
System unable to write to EISA CMOS.
Write down the message and contact your dealer or an
authorized service center.
=====================================================
Error Messages code
02F5 DMA Test Failed
Corrective Action
System unable to write to DMA (Direct Memory Access) registers.
Write down the message and contact your dealer or an authorized service center.
=====================================================
Error Messages code
02F6 Software NMI Failed
Corrective Action
System unable to generate software NMI (Non- Maskable Interrupt).
Write down the message and contact your dealer or an authorized service center.
=====================================================
Error Messages code
02F7 Fail-Safe Timer NMI Failed
Corrective Action
Fail-safe timer takes too long.
Write down the message and contact your dealer or an authorized service center.
=====================================================
Error Messages code
device Address Conflict
Corrective Action
Specific device has an address conflict.
Enter the BIOS Setup Utility and verify the parameters
(try loading the default settings); then save and restart
=====================================================
Error Messages code
your computer. Failing Bits: nnnn
Corrective Action
Memory test failed.
Write down the message and contact your dealer or an
authorized service center
=====================================================
Error Messages code
Invalid System Configuration Data
Error with NVRAM (CMOS) data.
Enter the BIOS Setup Utility and verify the parameters
(try loading the default settings); then save and restart
your computer.
I/O device IRQ conflict
I/O device has IRQ (Interrupt Request) conflict.
Enter the BIOS Setup Utility and verify the parameters
(try loading the default settings); then save and restart
your computer.
=====================================================
Error Messages code
Operating system not found
Operating system cannot be found on the boot device.
Enter the BIOS Setup Utility and verify the hard disk,
floppy drive, and boot parameters (try loading the
default settings); then save and restart your computer.
If the problem persists, you may need to recover your
hard disk, or reinstall the operating system.
Parity Check 1 nnnn
Parity error found on system bus.
Write down the message and contact your dealer or an
authorized service center.
Parity Check 2 nnnn
Parity error found on I/O bus.
Write down the message and contact your dealer or an
authorized service center.
https://www.acer.com/ac/en/ID/content/support
Drivers and Manuals
Driver (7)
AGP
AGP Driver
Date:
2009/01/15
Version:
5.00.00.0405
Vendor:
VIA
Size:
5.3 MB
Chipset
Chipset Driver
Date:
2009/01/15
Version:
5.00.00.0120
Vendor:
VIA
Size:
5.3 MB
Lan
LAN Driver
Date:
2009/01/15
Version:
1.08.0201.2001
Vendor:
Accton
Size:
23.3 KB
Modem
Modem Driver
Date:
2009/01/15
Version:
5.98.0.0
Vendor:
Lucent
Size:
374.4 KB
TabletButton
Tablet Button Driver
Date:
2009/01/15
Version:
1.0
Vendor:
Acer
Size:
677.4 KB
TouchPad
Touchpad Driver
Date:
2009/01/15
Version:
5.3.203.4
Vendor:
ALPS
Size:
1.7 MB
VGA
VGA Driver
Date:
2009/01/15
Version:
6.13.10.1012
Vendor:
ATI
Size:
4.0 MB
Documents (2)
Language:
Generic UG
Generic User Guide
Date:
2010/02/26
Version:
1.0
Vendor:
Acer
Size:
1.1 MB
User Manual
User Manual
Date:
2009/01/16
Version:
1.0
Vendor:
Acer
Size:
6.7 MB
Please read our Software License Information.
Demikian sekilas tentang Frequently-asked questions & Driver laptop Acer Aspire 1200 yang dapat saya post mudah – mudahan bisa membantu dan bermanfaat. Terima kasih
Salam soder
Tidak ada komentar:
Posting Komentar